Feeds & Speeds Advisor

Describe the cut for a recommended start and its Machining Envelope.

Work material Condition Tool material Operation Rigidity Tool diameterin Flutesteeth Stickout Optionalin Axial DOC Optionalin Radial DOC Optionalin Max RPM OptionalRPM

Advanced setupMachine limits and manual manufacturer values

Machine profile Spindle powerhp Max feedIPM Surface speed source Starting surface speedSFM

Open reference rangeSFM

Chip load source Modeled target chip thicknessin/tooth

Axial and radial depth of cut (DOC) are optional. Max spindle RPM only caps the RPM recommendation and envelope if the calculated range reaches the machine limit.

Already have your cutting values? Use the Feeds & Speeds Calculator.

Enter the cut details to see a recommendation.The Advisor calculates automatically once it has enough information.

Engineering reference only. Verify critical dimensions, parameters, machine/tool limits and governing specifications before use. Terms & Disclaimer

Method & sources

The Advisor calculates RPM, feed per tooth, feed rate, material removal rate, cutter engagement angle and radial chip thinning from machining geometry and openly licensed reference data. The Machining Envelope is intended for full-size industrial/VMC-class machining.

Exact tool-manufacturer values can be entered in Advanced Setup when available and should take precedence for the exact cutter and material.